Accueil > Articles & Reviews > [TEST] DFI Lanparty BI-785G-M35
[TEST] DFI Lanparty BI-785G-M35   vu 4403 fois Imprimer Envoyer
Note des utilisateurs: / 5
MauvaisTrès bien 
Écrit par Grégory Steenbeek le Dimanche, 24 Janvier 2010 14:32   
Page 2 de 9

 

 

 

1. Présentation de la carte :
 
 
Présentation générale
 
 
LANPARTY BI 785G-M35
 
 
CPU
  • AMD® Phenom™ II processor
  • AMD OverDrive provides tuning options using the new “Advanced Clock Calibration” overclocking feature.
  • Socket 938 AM3+ 45nm
FSB/QPI/HT
  • HyperTransport 3.0 (5200MT/s)
Chipset
  • AMD chipset
    - Northbridge: AMD 785G
    - Southbridge: AMD SB710
System Memory
  • Four 240-pin DDR3 DIMM sockets
  • Supports DDR3 1600(O.C.)/1333/1066/800 MHz
  • Dual channel (128-bit wide) memory interface
  • Supports non-ECC unbuffered DIMMs
  • Supports up to 16GB system memory
  • 128MB DDR3 Sideport memory
Expansion Slots
  • 1 PCI Express (Gen 2) x16 slot
  • 1 PCI Express x1 slot
  • 2 PCI slots
BIOS
  • Award BIOS
  • CMOS Reloaded
  • 8Mbit SPI Flash ROM
Graphics
  • Integrated ATI Radeon™ HD 4200 graphics core
  • Onboard graphics interface
    - HDMI port for both digital audio and video HD display
    - DVI-I port for digital LCD display (DVI-D signal only)
  • Microsoft® DirectX 10.1
  • CrossFireX™ (Hybrid Graphics) technology combines the onboard GPU and a discrete PCIE graphics card
  • Onboard Performance cache for added performance
Audio
  • Realtek ALC885 High Definition audio CODEC
  • 8-channel audio output
  • DAC SNR/ADC SNR of 106dB/101dB
  • Full-rate lossless content protection technology
  • Optical S/PDIF-out and coaxial RCA S/PDIF-out interfaces
LAN
  • JMicron JMC250 PCIE Gigabit LAN controllers
  • Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards
Serial ATA
  • Supports up to 6 SATA devices
  • SATA speed up to 3Gb/s
  • RAID 0, RAID 1 and RAID 0+1
IDE
  • One IDE connector allows connecting up to two UltraDMA 133Mbps hard drives
Rear Panel I/O Ports
  • 1 mini-DIN-6 PS/2 mouse port
  • 1 mini-DIN-6 PS/2 keyboard port
  • 1 HDMI-out port
  • 1 coaxial RCA S/PDIF-out port
  • 1 optical S/PDIF-out port
  • 1 VGA port
  • 1 DVI-I port (DVI-D signal only)
  • 4 USB 2.0/1.1 ports
  • 1 RJ45 LAN port
  • Center/subwoofer, rear R/L and side R/L jacks
  • Line-in, line-out (front R/L) and mic-in jacks
Internal I/O
  • 4 connectors for 8 additional external USB 2.0 ports
  • 1 connector for an external COM port
  • 1 front audio connector
  • 1 S/PDIF connector
  • 6 Serial ATA connectors
  • 1 40-pin IDE connector
  • 1 floppy connector
  • 1 24-pin ATX power connector
  • 1 8-pin 12V power connector
  • 1 front panel connector
  • 1 download flash BIOS connector
  • 6 fan connectors
Power Management
  • ACPI and OS Directed Power Management
  • ACPI STR (Suspend to RAM) function
  • Wake-On-PS/2 Keyboard/Mouse
  • Wake-On-USB Keyboard/Mouse
  • Wake-On-Ring
  • Wake-On-LAN
  • RTC timer to power-on the system
  • AC power failure recovery
Hardware Monitor
  • Monitors CPU/system/chipset temperature
  • Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vdimm/Vchip voltages
  • Monitors the speed of the cooling fans
  • CPU Overheat Protection function monitors CPU temperature during system boot-up
PCB
  • microATX form factor
  • 24.5cm (9.64”) x 24.5cm (9.64”)
 
 
 


Kgp3 le 2010-04-08 à 19:14:32
Salut...

J'étais interressé par cette carte mère seulement elle a 2
défauts visiblement...pour commencer le seul port pcie 1x est mort d'avance
avec ma carte graphique...et 2, le pire c'est que tous les USB internes se
trouvent aussi sous le 2eme slot de la carte graphique.

Comment pouvoir
brancher les usb de mon boitier en facade alors?

Merci d'avance
Seuls les utilisateurs connectés peuvent écrire un commentaire !
Suivant >
 
Bannière
Plan du site | Partenaires | Contacts | |