Retour au site JMax-Hardware
19 Novembre 2017 à 20:50:28 *
Bienvenue, Invité. Veuillez vous connecter ou vous inscrire.
Avez-vous perdu votre courriel d'activation?

Connexion avec identifiant, mot de passe et durée de la session
Nouvelles:
 
   Accueil   Aide Rechercher Calendrier Identifiez-vous Inscrivez-vous  
Pages: [1]
  Imprimer  
Auteur Fil de discussion: Silent and strong chiller  (Lu 2263 fois)
facebook Twitter google live myspace yahoo
piotres
JMH Active Member
***
Hors ligne Hors ligne

Messages: 116



Voir le profil WWW
« le: 23 Janvier 2011 à 03:59:49 »

Hello

It's strong and silent chiller. For me it's very hard to connect big cooling power and silent in chiller with one compressor. So I used two - Aspera NE2134GK, IMO those compressors are almost same silent as NL11F - each one work with one plate HX, plate HXes are connected in series.

2 compressors ...

2 condensers ...

2 plate HXes ....

Pressure gauges and controller is on top of case because owner want to have really low case, and also not too wide and long ..so that was really tricky to mount all inside it.


It works using very silent and quite strong fans - SilenX Ixtrema IXP-76-18, 16 fans were used.

Pump is also silent and enought strong Swiftech MCP-655.

With R507 unit was capable to hold 500W heatload in liquid with -22*C with very low sound level .

compressor: 2x Aspera NE2134GK
heat exchanger: 2x plate HXes 20 plates
XV: 2x ALCO TI-HW
condensers: 2x 1.9kW each one with 4x SilenX Ixtrema IXP-76-18 153m3/h, 18dB
safety: 2x Danfoss Cut-offs
refrigerant : R507+R134a (mainly R134a)
case: black custom case
pump : Swiftech MCP-655 (Laing D5)
reservoir : Swiftech MC-RES Micro 2
others: electronic controller CAREL with touch buttons, REFCO pressure gauges, 6x SilenX Ixtrema IXP-76-18 153m3/h, 18dB in back of case .















































That's loaded with 500W "tea" heater put in liquid. Carel's probe isn't put in liquid on that photo.
That was with pure R507.



But person who order it want only around 0*C loaded ...
So I fill it with R134a and it make +2*C with 500W load.



Pressures are quite low, even fully loaded.









Do You like it ? :rolleyes:

Peter
Journalisée

FanTasTik
JMH Active Member
***
Hors ligne Hors ligne

Messages: 152


Voir le profil
« Répondre #1 le: 23 Janvier 2011 à 12:05:45 »

One more time
Awesome Job.
Journalisée
Wizerty
JMH Diamond Member
********
Hors ligne Hors ligne

Messages: 5053



Voir le profil
« Répondre #2 le: 23 Janvier 2011 à 13:00:43 »

 
Journalisée

Pages: [1]
  Imprimer  
 
Aller à:  

Powered by SMF 1.1.17 | SMF © 2006-2008, Simple Machines
wow-annexe.fr  actualité informatique  WebAnalytics
  PUB